EMP Shielded Rooms & Control Centers

EMP Shielded Rooms & Control Centers

EMP-Shielded-Rooms-&-Control-Centers

A prefabricated modular EMP Protected Cage (internal to or independent of the host building) provides superior screening of RF signals and is applicable in a wide range of situations for a wide range of purposes of HEMP & EMP.

  • High shielding performance without deterioration

  • Freestanding construction

  • Easy to modify, enlarge, or reinstall with conventional hand-power tools

  • Easy to mount by skilled local workers

  • Custom designs are available

  • Entry panel fitted with: power filters, single-phase or three-phase (specify ampere, voltage, and frequency)

  • Feed through signal filters

  • Waveguides for the passage of fibre optic cables

  • Feed through penetration (e.g., SMA or BNC connector)

  • Grounding bolt

On-Site Installation

On-site installation of EMP Protected Areas is an equally important and skilled task as the basic product design and manufacturing. Our experienced and skilled team offers a full turnkey solution for the installation and testing of the EMP Protected Areas on Site.

Advantages include:
  • Measurement on location

  • Cost-effective

  • Certification

  • Expertise in all screening/shielding disciplines

EMP Cabinets Racks

EMP-Cabinets-Racks

Paras Defence is the only Indian company to design & manufacture EMP Protected Racks and Cabinets providing 100+ db Shielding Effectiveness (S.E.). It is very challenging to achieve such high Shielding Effectiveness protection in small structures.

  • Layered construction to cater Wide Range of Frequencies.

  • Very high shielding performance in high challenging compact dimensions

  • Perfectly Engineered points of entries to achieve all-round electromagnetic protection.

  • Constructed using special material which is compatible with galvanized steel and aluminium

  • Rugged construction to meet harshest of environmental conditions.

  • 100% designed, developed & manufactured in India.

On-Site Installation

On-Site Installation of EMP Protected Areas is an equally important and skilled task as the basic product design and manufacturing. Our experienced and skilled team offers a full turnkey solution for installation and testing of the EMP Protected Areas on Site.

Advantages include:
  • Measurement on location

  • Cost-effective

  • Certification

  • Expertise in all screening/shielding disciplines

EMP Filters

EMP-FILTER

Power Line, as well as Signal Line Filters, are available for EMP Protection, as per user requirements.

Power Line Filters:
  • Selection from a Wide Power and Frequency Range

  • Mains filter for single and three-phase systems

  • Insertion transmission loss: 100 dB @ 14 kHz

  • Double-π circuit

  • Rod cores allow an asymmetrical load.

  • Self-healing effect of foil capacitors

  • Suitable for use under extreme conditions (military applications)

  • Wear resistant

  • Insensitive to corrosion

  • Signal Line Filters

  • Wide Range of Signal Line Filters

  • Available for Standard Signals, viz., Audio, DVI, & USB Data

  • Fibre-optic Ethernet converter

  • Telephone and data communication

  • Control and fire alarm

Anechoic Shielded Chambers

Anechoic-Shielded-Chambers
  • Fully compliant design to meet MIL 461 requirements

  • Any dimensions are possible.

  • Emission performance of +/-4 dB or better in the 30 MHz–40 GHz frequency range

  • Ferrite and hybrid lining from 30 MHz to 40 GHz measurements

  • A very cost-effective solution

  • Flexible modular design enables you to make easy site changes or upgrades.

  • A complete system approach is available to fully facilitate your laboratory.

Interface Design

The interfaces to and from any EMI or EMP-protected unit have to be carefully designed to ensure no losses or leakages are found. We offer a wide solution for this.

Advantages include:
  • EMC line filters with integrated power inlet

  • High-performance shielding cable entry system

  • High-performance EMC cable glands

  • Shielded connector hoods

  • Cable grounding clamps

  • Shielding accessories for cables

  • EMI / RFI cable entry glands

On-Site Installation

On-site Installation of EMP-protected Protected Areas is an equally important and skilled task as the basic product design and manufacturing. Our experienced and skilled team offers a full turnkey solution for the installation and testing of the EMP Protected Areas on site.

Advantages include:
  • Measurement on location

  • Cost-effective

  • Certification

  • Expertise in all screening/shielding disciplines

Screen Doors

Screen-Doors

Paras Defence is the undisputed market leader in Shielded Doors, where we produce a large number of doors every year for various Electromagnetic Shielding applications. Shielded Door(s) becomes the most critical Point-Of-Entry (PoE) in any installation, as the door is opened multiple times & each time it is closed, it is required to offer the same Shielding Performance.

Applications :
  • Offer exceptional Shielding performance along with ease of operation & high durability.

  • Special Engineering focus is made during the design and manufacturing of Shielded doors, as they are the most critical Point-of-Entry due to their frequent usage.

  • The heavy-duty cam latch strikes for two-point latching.

  • The rugged construction of the door is suitable for Naval & Heavy Industry applications.

  • Fire classification can be offered as an optional requirement.

  • Single finger strip door (finger strip door with soldered or clamped fingers)

  • Offer heavy-duty cam latch strikes for two-point latching & clip-in-place Beryllium Copper finger stock.

Screen Rooms & Range Of EMI/RFI Shielding Products

Screen-Rooms-&-Range-Of-EMIRFI-Shielding-Products

The cWave Series from Paras Defence is a range of EMI Shielding products / RFI Shielding products. Products like Screen Doors, Screen Rooms, Conductive Foam Gasket, Finger Stocks, EMI Window, Conductive Silicone Gasket etc. make the cWave Series. Paras Defence has today dedicated its R&D efforts in the field of EMI EMC Solutions and has the knowledge and expertise to overcome problems arising due to radiated & conducted Noise. The development of Screen Room & Screen Doors for the Indian Navy with successful efforts in improving the design, has made Paras Defence the only certified vendor to the Indian Navy for Screen Doors.

Paras Defence represents companies worldwide that manufacture EMI Shielding products / RFI Shielding products like gaskets, finger stocks etc. Today, with an increase in awareness of EMI problems, there has been a steep rise in applications where such products can be used, be it mobile phones or aircraft.

Features:
  • Extensive knowledge resource

  • In-house pre-compliance test facilities for RE & CE

  • Access to world-class EMI/RFI Shielding components

  • Recognized by the Industry Experts in the field of EMI/EMC

  • Experience in the manufacturing of Screen Doors, Screen Rooms, RFI Shielding Enclosure etc.

Applications:
  • Communication Devices

  • Home appliances

  • Mobile Equipments

  • Mission-critical systems

  • Sensitive electronics, etc.

EMP Hardened Products

EMP-Hardened-Products

We are the only Indian Company where our products, like Rugged Displays, Rugged Computers are EMP protected & also tested for compliance.

Shielded Air Vents & Windows

Air-Vents-Wave-guides-Panels

Paras Defence designs and manufactures their own Air vents & Wave-guides required for all their projects. These are used to shield static Points-Of-Entries (PoE) and are vital to the overall shielding performance of the area. Every PoE is treated and ensured to provide the same or better shielding performance.

Automated Test Equipments (ATE)

Automated-Test-Equipments-(ATE)

Automated Test equipments are manufactured and integrated by Paras Defence in collaboration with an Israeli Company with high standards, quality, and processes. The ATE Design is governed by the Israeli Company and comprises of complex test capabilities and predictable performance. With immense experience in this field, ATE’s by Paras Defence meet the most demanding needs of testing complex systems.

Applications:
  • Test facility for high-precision systems

  • Testing of Missiles and Systems

Defence Automation Solutions (DAS)

Defence-Automation-Solutions

We’ve made inroads into Automation for Defence with a focus to integrate its multiple strengths into a solution. With this solution-based approach and strong concept understanding, we could gradually pioneer the Defence Automation Solutions by delivering state-of-the-art Rugged Control Systems.

MIL-Grade COTS Products

MIL-GRADE-COTS-Products
cCots:

Rugged Solutions for Commercial Products. The cCOTS series incorporates solutions offered by Paras Defence, wherein a commercially available system is modified to operate in an Industrial or Military Environment.

Ruggedisation of commercial systems (COTS) is implemented based on concepts of Passive/Active Thermal Management, Structurally Rigid Subcomponent Assembly and EMI/EMC Shielding etc. All this is done to keep the OEM’s warranty and support intact. Some of the successfully implemented versions of this series are Rugged Cisco Routers, Rugged RAD Modems, Rugged Sun Workstations, and Nortel IP Phones, etc.

Applications:
  • Mission Critical-High Performance Applications

  • Military Communications

  • Networking in the Military

MAP

We’d love to hear from you

D-112, TTC Indl. Area, Nerul, Navi Mumbai - 400706, Maharashtra, India

Tel.: +91-22-6919 9999

Fax : +91-22-6919 9990

Email: business@parasdefence.com

Optics Mfg, Opto-Mech Integration, Electronics D&E, System Integration, Directors & Corporate Departments

M-6, Addl. MIDC, Ambernath (E), Thane-421506, Maharashtra, India

Tel.: +91-251-2620 333

Fax : +91-251-2621 222

Email: office@parasdefence.com

Heavy Engineering Mfg., Mechanical System Integration, Test Facilities

23, 2nd Floor, Sankey Square, Sankey Road, Lower Palace Orchards, Bengaluru - 560003 Karnataka, India

Tel.: +91-80-2346 4139

Fax : +91-80-2346 4142

Email: business@parasdefence.com

Optics Design, Advanced Electronics System Design, Sales & Marketing, Projects & Customer Interface, After Sales Support​

1108, Shivalik Satyamev, near Vakil Saheb bridge, Bopal Approach Ahmedabad - 380058

Tel : +91 94270 01143

Email: business@parasdefence.com

Optics Design, Optics Simulations, Opto-Mechanical Assemblies etc.​

108/A, Survey No. 262 IDAphase-2, B N Reddy Nagar, Cherlapalli, Hyderabad, Telangana, India-501301

Tel.: +91-22-6919 9999

Fax : +91-22-6919 9990

Email: business@parasdefence.com

Electronics D&E, System Integration

map-loaction

Presence in Delhi, Chennai, Pune etc.

Sales & Marketing, Customer Interface, Post Sales Co-ordination​